A Case of Undiagnosed Schizophrenia With Catatonia in a Hispanic Adolescent: The Significance of Social Determinants in the Diagnosis and the Efficacy of Risperidone and Lorazepam in Treatment.

Catatonia is a potentially life-threatening motor dysregulation syndrome associated with various psychiatric, medical, or developmental conditions. It is not uncommon but rarely described in the pediatric population. The timely identification of catatonia is essential as the treatment approach differs from the differential diagnoses and possible underlying conditions. The social determinants of health are factors that may negatively impact psychological well-being, increase the risk and prevalence of mental disorders, and deteriorate the prognosis for those who already have them. The comprehension of social determinants of health is essential because it provides a deeper understanding of the complexity of societal structures and how they influence the lives of children and families. This case demonstrates how social determinants of health may contribute to misdiagnosis, delayed diagnosis, and an increase in the incidence of mental health disorders. We present a case report on a Hispanic adolescent with first-episode catatonia in the presence of disorganized, psychotic thoughts. The patient was successfully treated with the lorazepam challenge in conjunction with Risperidone M-Tab treatment in three days. The origin of catatonia was rooted in undiagnosed schizophrenia that had worsened over a year originating from a first-episode break that questions an untreated substance-induced psychosis: the substance is unknown, as her parents had not brought her to the emergency department at that time. The demographics of this patient have also placed her at risk for a lack of access and sociocultural aspects in the delay of treatment. Through this case report, we aim to highlight some critical points in diagnosing and managing nonmalignant catatonia in a demographically underserved minority adolescent female. This report emphasizes the need for more data about the etiology and treatment of catatonia, especially in the pediatric population.

Transforming Medical Education: Assessing the Integration of ChatGPT Into Faculty Workflows at a Caribbean Medical School.

INTRODUCTION: ChatGPT is a Large Language Model (LLM) which allows for natural language processing and interactions with users in a conversational style. Since its release in 2022, it has had a significant impact in many occupational fields, including medical education. We sought to gain insight into the extent and type of usage of ChatGPT at a Caribbean medical school, the American University of Antigua College of Medicine (AUA). METHODS: We administered a questionnaire to 87 full-time faculty at the school via email. We quantified and made graphical representations of the results via Qualtrics Experience Management software (QualtricsXM, Qualtrics, Provo, UT). Survey results were investigated using bar graph comparisons of absolute numbers and percentages for various categories related to ChatGPT usage, and descriptive statistics for Likert scale questions. RESULTS: We found an estimated 33% of faculty were currently using ChatGPT. There was broad acceptance of the program by those who were using it and most believed it should be an option for students. The primary task ChatGPT was being used for was multiple choice question (MCQ) generation. The primary concern faculty had was incorrect information being included in ChatGPT output. CONCLUSION: ChatGPT has been quickly adopted by a subset of the college faculty, demonstrating its growing acceptance. Given the level of approval expressed about the program, we believe ChatGPT will continue to form an important and expanding part of faculty workflows at AUA and in medical education in general.

Survival and performance of a dual tapered-wedge fully HA-coated press fit femoral stem.

INTRODUCTION: Fully hydroxyapatite-coated titanium alloy double-tapered stems have been successful implant designs for THA. The Novation Element Stem (Exactech, Gainesville, FL) is one of several of these implants following a modified Corail design philosophy. Although a great deal is known about the results of the Corail stem, little is known about the more recent Corail-inspired implants. The authors evaluated the clinical outcomes, radiographic findings and survival statistics of the collarless version of the Element Stem when used routinely in a diverse patient population. METHODS: A retrospective review was performed for all primary THR cases from 2010 to 2018. Patient demographics and HHS/OHS/patient satisfaction scores were obtained. Radiographs were evaluated for stem subsidence, radiolucencies, and bone responses to the implant. RESULTS: One hundred and fifty seven Element Stems were implanted with greater than 2 years of radiographic follow-up, while 105 Element Stems implanted during the study period had a survival of 5 years or more. Average HHS was 91.7 and average OHS was 44.0. 54 of 157 hips had radiolucencies, all of which included a proximal zonal radiolucency. Average subsidence was 3.33 mm; 18 hips had subsidence > 4 mm. There were 8 revisions for: aseptic loosening (4), trauma-related peri-prosthetic fractures, and early proximal-medial fractures. At 5 years, the all-cause survival rate is 92.4%, 96.2% based only on aseptic loosening and 98.1% based only on proximal medial fractures. CONCLUSION: Clinical outcomes using the collarless Novation Element Stem are good, but early proximal medial fracture is still a factor in patients with poor-quality bone. Proximal radiolucencies progressing to aseptic loosening post-operatively are also a concern. The 11.5% rate of subsidence is comparable to other fully HA-coated collarless stems. This study provides a thorough critical analysis of outcomes and midterm survival data of this dual tapered-wedge fully HA-coated collarless stem used routinely in a diverse patient population.

Survivorship and Outcomes of Femoral Neck Preserving Stems in Primary Total Hip Arthroplasty.

BACKGROUND: Short-stem femoral implants (SSFIs) promote the preservation of bone in the femoral neck, reduce soft tissue disruption, and facilitate minimally invasive surgical techniques. The purpose of this study was to report the revision rate, complication rate, patient satisfaction, patient-reported outcomes, and radiographic outcomes of patients who underwent total hip arthroplasty (THA) with the Alteon Neck Preserving Femoral Stem (ANPS). METHODS: A prospectively maintained database was reviewed which analyzed 92 THAs between the years 2016 and 2018. Patient-reported outcomes, patient satisfaction, complication rates, and radiographic outcomes were assessed at 2-5 years postoperatively. RESULTS: The final cohort consisted of 63 hips. Five patients (7.9%) underwent revision surgery and 2 (3.2%) had other complications not requiring revision. Survivorship when considering only the femoral component was 93.7% at an average of 41.4 months of follow-up. The average postoperative Oxford Hip Score (41.5 ± 8.3) and Harris Hip Score (77.9 ± 16.6) demonstrated significant improvement among our nonrevised patients, respectively (P < .001). Radiographs demonstrated spot welding in 56% of arthroplasties most commonly in Gruen Zones 2, 3, and 13 and that femur radiolucencies were visualized in 58% predominantly along the distal aspect of the stem. Radiographic femoral component subsidence was present in 9.7% of patients. CONCLUSION: The ANPS may be less reliable than previously reported. Our cohort's revision rate was unacceptably high with 6.3% requiring revision surgery for femoral component loosening in less than 5 years. Surgeons should consider the challenges and prohibitive failure rate associated with SSFIs before routine usage in THA.

Unexpected Wear of a Uniquely Designed Moderately Cross-Linked Polyethylene in Total Hip Arthroplasty.

BACKGROUND: A uniquely designed, non-heat-treated moderately cross-linked acetabular polyethylene liner used in total hip arthroplasty (THA) demonstrated excessive wear during routine follow-up, prompting an evaluation of the linear wear rate. METHODS: All THAs were performed by the senior author. The study group included 38 THAs using the uniquely designed polyethylene in question, compared to a control group of 21 THAs using another moderately cross-linked polyethylene with good 10-year outcomes. Two-dimensional linear head penetration wear measurements were obtained using the Martell Hip Analysis Suite, and retrieval analysis was performed on two liners. RESULTS: The study group had a significantly higher average penetration rate of 0.089 mm/y than the control group average rate of 0.047 mm/y (P = .04). Forty-five percent of the study group had a wear rate above the osteolysis threshold (0.1 mm/y), compared to 24% in the control group. Macroscopic analysis of two retrieved liners validated the radiographic findings. CONCLUSION: The data suggest unexpectedly higher wear rates for a moderately cross-linked polyethylene design, with nearly half of the study group at risk for osteolysis. Further registry or database analyses of this particular moderately cross-linked polyethylene are warranted.

High-Viscosity Versus a Lower-Viscosity Cement Penetration at Dough Phase In Vivo in Primary Total Knee Arthroplasty.

BACKGROUND: Previous studies have shown that the depth of cement penetration and the presence of radiolucent lines (RLLs) correspond with the risk of aseptic loosening in total knee arthroplasty, while others have found a correlation between the viscosity of the cement and the depth of cement penetration. We compared cement marketed as high-viscosity cement (HVC) with one marketed by the same manufacturer as low-viscosity cement (LVC). We hypothesized that no significant difference would be found in depth of penetration or presence of RLLs between the two cohorts. METHODS: The HVC (n = 50) and LVC cohorts (n = 50) were gathered from two sequential series of primary total knee arthroplasties using the same implants and cementing techniques. Depth of cement penetration and presence of RLL were measured in four tibial zones and were compared between cohorts. RESULTS: There were no cases of aseptic loosening in either cohort at a mean of 29 months. Mean maximum cement penetration in 3 of the 4 zones was >3 mm with both cements. There was no significant difference in maximum penetration in any zone between the two cements. There were fewer tibial radiolucencies with HVC than LVC. CONCLUSION: These findings suggest that the marketing description of HVC or LVC is not necessarily a factor in cement penetration. The term high viscosity should not be used as a descriptor of cement that reaches dough phase more quickly, but rather cement that has a higher viscosity at its dough phase when it is typically applied.

Clinical and radiographic outcomes of total hip replacement with a 3-part metaphyseal osseointegrated titanium alloy stem enhanced with low plasticity burnishing: a mean 5-year follow-up study.

BACKGROUND: This study evaluates midterm results of a 3-part titanium alloy stem with metaphyseal fixation and a neck-metaphyseal taper junction strengthened with low plasticity burnishing (LPB). Our hypothesis is that this multimodular implant with LPB succeeds in offering the advantages of three-part modularity without junctional failure. METHODS: Twenty-eight of 32 complex primary (n = 9) and revision (n = 9) total hip arthroplasties were accounted for with minimum 2-year follow-up. Clinical and radiographic data were reviewed at a mean follow-up period of 60 months. One stem, removed for failure to osseointegrate, was submitted for sectioning and taper examination. RESULTS: There were no modular junction failures despite body mass indices of 20 to 40 and offsets of 34 to 47 mms. Implant survival was 96.3%, with one removal due to aseptic loosening in a patient with chronic renal failure. Taper analyses of the removed implant showed minimal damage. Preoperative and postoperative Harris Hip Scores and Oxford Hip Scores were 20 to 86 and 16 to 41, respectively. Patient satisfaction was 9.7/10. Radiographs showed stem subsidence >2 mm and radiolucencies around the metaphyseal cone only in the hip requiring implant removal. CONCLUSIONS: This 3-part titanium alloy modular stem with LPB of the neck-metaphyseal taper junction showed good functional and radiographic results at a mean 5 years without junctional failures. Although this follow-up exceeds previously published reports, longer follow-up will be important to confirm our confidence in the additional strengthening provided by LPB.

Diaphyseal Tibial Soft-Tissue Mass After Total Knee Arthroplasty: A Case Report.

CASE: A 64-year-old woman had undergone bilateral total knee arthroplasty in 1998. In 2010, she presented with a large, painless, diaphyseal soft-tissue mass of the lower leg. She indicated that she had no history of knee pain, trauma, or infection. Ultimately, the mass was found to be a synovial fluid-filled cyst that communicated with the knee joint, which was a result of severe osteolysis. CONCLUSION: Large diaphyseal tibial masses in the presence of total knee arthroplasty should raise a high index of suspicion not only for tumors and infections, but also for severe osteolysis. Knowledge of the various ways that osteolysis can present as well as an appropriate workup will help to guide diagnosis and management.

The effect of viscosity on cement penetration in total knee arthroplasty, an application of the squeeze film effect.

The authors present a prospective randomized blinded cadaver study designed to evaluate the engineering concept of a squeeze film effect and the effect of cement viscosity on cement penetration in total knee arthroplasty. This was done in response to an earlier clinical study demonstrating inferior tibial cement penetration using early, often liquid, phase cement. Paired cadaver tibias were implanted with the tibial component using either liquid or dough phase cement. Based on an AP fluoroscopic image, the dough phase cement penetrated deeper than liquid in all four zones. This was statistically significant in zones 1, 2 and 3. Deeper cement penetration has been shown to provide a stronger cement-bone interphase. As a result dough phase cement is recommended to obtain optimal cement penetration.

Developing and pilot testing practical measures of preanalytic surgical specimen identification defects.

Accurate patient identification is a National Patient Safety Goal. Misidentification of surgical specimens is associated with increased morbidity, mortality, and costs of care. The authors developed 12 practical, process-based, standardized measures of surgical specimen identification defects during the preanalytic phase of pathology testing (from the operating room to the surgical pathology laboratory) that could be used to quantify the occurrence of these defects. The measures (6 container and 6 requisition identification defects) were developed by a panel of physicians, pathologists, nurses, and quality experts. A total of 69 hospitals prospectively collected data over 3 months. Overall, there were identification defects in 2.9% of cases (1780/60 501; 95% confidence interval [CI] = 2.0%-4.4%), 1.2% of containers (1018/81 656; 95% CI = 0.8%-2.0%), and 2.3% of requisitions (1417/61 245; 95% CI = 1.2%-4.6%). Future research is needed to evaluate if hospitals are able to use these measures to assess interventions meant to reduce the frequency of specimen identification defects and improve patient safety.

Early mortality risk score: identification of poor outcomes following upfront surgery for resectable pancreatic cancer.

BACKGROUND: Identifying pancreatic cancer patients at high risk of early mortality following pancreaticoduodenectomy (PD) is important for treatment decisions in a multidisciplinary setting. This study examines the preoperative predictors of early mortality following PD and combines these variables into an early mortality risk score (EMRS). METHODS: Medical records of patients who underwent PD for pancreatic adenocarcinoma at the Johns Hopkins Hospital between 30 August 1993 and 28 February 2005 were reviewed. Cox proportional hazards analysis was performed to identify predictors of early mortality, defined as death at 9 and 12 months. EMRS was constructed from univariate associated risk factors (age >75 years, tumor size ≥ 3 cm, poor differentiation, co-morbid diseases) with each factor assigned 1 point (range of 0-4). EMRS was evaluated as an independent predictor of death at 9 and 12 months. RESULTS: On univariate analysis, risk factors for death at 9 months included age ≥ 75 years (RR, 1.6; p = .009), comorbid disease (RR, 1.5; p = 0.020), tumor ≥ 3 cm (RR, 1.4; P = 0.050), and poor differentiation (RR, 2.1; P < 0.001). EMRS was associated with early mortality among those who did (p = 0.038) and did not receive adjuvant treatment (p < 0.001). A modified EMRS without tumor differentiation was also associated with early mortality (p < 0.001). Results persisted when reanalyzed using death at 12 months. CONCLUSIONS: EMRS may identify patients at risk of early mortality following PD who may be candidates for alternatively sequenced treatment protocols. Prospective validation of this EMRS is needed.

Eleven-year implant survival rates of the all-polyethylene and metal-backed modular Optetrak posterior stabilized knee in bilateral simultaneous cases.

A prospective randomized study was conducted to determine if a design change in the articular surface geometry introduced in the Optetrak total knee to increase prosthetic joint conformity and further reduce polyethylene stress had any impact on implant survival, particularly when the all-polyethylene version of the implant was used. Forty-seven patients undergoing bilateral simultaneous total knee arthroplasties were randomized for the side, receiving an all-polyethylene tibial component and followed up for a mean 11.6 years. Survival rates for the all-polyethylene and metal-backed modular versions of the implant were both 98%, excluding a single case of deep infection. Survival rates with revision for aseptic loosening as an end point were 100%. The increase in tibial and femoral radii in the coronal plane of the Optetrak posterior stabilized knee did not result in a reduced implant survival rate in either the metal-backed modular or all-polyethylene versions of the implant.

Measuring communicative performance with the FAPCI instrument: preliminary results from normal hearing and cochlear implanted children.

OBJECTIVE: To develop preliminary "growth curves" of Functioning after Pediatric Cochlear Implantation (FAPCI) scores using a cross-sectional sample of normal hearing children and to compare these curves to trajectories of FAPCI scores in children receiving cochlear implants. METHODS: Quantile regression was used to develop growth curves from the FAPCI scores of a cross-sectional sample of 82 normal hearing children (age range 7 months-5 years). Trajectories of FAPCI scores from a longitudinal cohort of 75 children with cochlear implants (age range 1-5 years) were compared to these growth curves. RESULTS: FAPCI scores were positively associated with increasing age in normal hearing children with a rapid increase in scores observed at earlier ages followed by a plateau at age 3 years. FAPCI trajectories for cochlear-implanted children varied with age at implantation and did not reach a plateau until age 5-6 years. CONCLUSION: Normal hearing children demonstrated increasing FAPCI scores with age, and these preliminary growth curves allow for the interpretation of a cochlear-implanted child's FAPCI scores in comparison to normal hearing children. Additional research using a larger, longitudinal cohort of normal hearing children will be needed to develop definitive normative FAPCI trajectories.

Surgical blood loss during femoral rodding in children with osteogenesis imperfecta.

BACKGROUND: Historically, patients with osteogenesis imperfecta (OI) have been reported to be at risk for significant surgical bleeding secondary to abnormalities in platelet function. By reviewing the operative blood loss in OI patients undergoing femoral osteotomies and rodding, we hoped to identify risk factors for excessive bleeding. METHODS: A retrospective review of 22 patients with 52 inserted femoral rods was conducted under Institutional Review Board approval. Information concerning patients and procedures was collected. Associations with mean blood loss were made for categorical variables using the unpaired t-test and for continuous variables using correlation. Multivariate linear regression was used to test the influence of potential risk factors for excessive bleeding. RESULTS: The mean blood loss was 197 cc (standard deviation [SD] 129 cc, range 10-500 cc). The adjusted mean blood loss (ratio of actual blood loss divided by the total predicted blood volume [Custer and Rau in "The Harriet Lane Handbook," 18th edn. Mosby-Elsevier, Philadelphia, p 382, 2009]) was 0.16 (SD 0.13, range 0.01-0.44). Six blood transfusions were required out of 42 cases for a transfusion rate of 14%. The mean blood loss in those patients who were transfused was 279 cc compared with 182 cc for those not transfused. There were no differences in the adjusted mean blood loss between acute fracture treatment versus elective reconstruction (P = 0.08), nor between primary rodding versus revision rodding (P = 0.66). Older patients tended to have lower adjusted mean blood loss, though this was not significant (P = 0.07). Increasing number of osteotomies tended to lead to increased adjusted mean blood loss (P = 0.05). There was no association between operative time and adjusted mean blood loss (P = 0.36). When adjusting for procedure characteristics, increasing age was associated with decreasing adjusted mean blood loss (P = 0.008). CONCLUSION: Predicting blood loss for femoral rodding in patients with OI is difficult, with no differences between revision and primary procedures or elective versus trauma cases. The blood loss in our patients undergoing femoral rodding was manageable, and the transfusion rate was reasonably low. Although massive blood loss has been described in patients with OI in the literature, we found that femoral rodding did not pose excessive risk of transfusion in our OI population.

The impact of resident teaching on total hip arthroplasty.

The author asked whether THA cases performed with major resident participation in a private practice setting were associated with greater use of health care resources, higher rates of technical errors, or a reduction in quality of outcome compared to THA cases performed without major resident involvement. Eighty-eight primary THA cases performed with major resident participation were compared to 61 cases without major resident participation. Resident cases took 20 minutes longer, required a second assistant more frequently (92% versus 23%) but did not have higher transfusion rates or result in a longer hospital stay. Resident cases did not have more complications or increased technical errors. Resident cases also did not have lower Harris hip scores or inferior Short Form SF-12 physical ratings at minimum 1-year followup.

The use of proximal fixed modular stems in revision of total hip arthroplasty.

Proximally fixed femoral stems in revision of total hip arthroplasties (THAs) have had inconsistent results. Our aim was to determine the safety and efficacy of a new proximally fixed modular stem in THA revision. Fifty-three patients underwent THA revision with the Exactech AccuMatch M-Series (Gainesville, Fla) modular stem and were followed up prospectively for an average of 2.5 years with preoperative and postoperative Harris Hip Score and SF-12 scores. A small number of complications were reported. One stem was revised within 4 weeks due to subsidence. No later mechanical failure cases were reported. Postoperative Harris Hip Score and SF-12 improved significantly. The use of this modular stem system appears to be safe and efficacious regarding fixation and function in the short term.

Five-year follow-up of primary Optetrak Posterior Stabilized total knee arthroplasties in osteoarthritis.

A series of 66 primary Optetrak Posterior Stabilized total knees with modular tibial components were followed prospectively for a minimum of 5 years in patients with osteoarthritis. Fifty-one percent of the patients were obese based on body mass index greater than 30. There was a statistically significant negative correlation between body mass index and both Hospital for Special Surgery and Knee Society scores. Despite reduced ratings due to obesity, 90% of the patients were rated good or excellent. Patellofemoral design changes nearly eliminated patellofemoral crepitation and soft tissue entrapment. Design changes did not compromise implant survival. Predicted implant survival at 93 months using reoperation for any reason as an end point was 97%.

The early innovators of today's resurfacing condylar knees.

The 1970s saw an explosion of ideas in the field of prosthetic knee arthroplasty. This paper is an effort to identify the innovators who contributed to the development of today's condylar total knee prostheses and the surgical techniques used to insert them. The 1970s were selected because most innovations occurred during those years. Two different design approaches were undertaken simultaneously. One was a functional approach whereas the other was a strictly anatomical approach. Initially, these 2 approaches led to very different designs. But the common goal of recreating human knee function eventually led to more similarities than differences. The author describes how, when, and why these dedicated individuals came to their ideas. The work is largely based on interviews and correspondence with those involved as well as on reviews of patents and papers pertaining to their work.